Oct 3, 2014 - CaptiveWorks CW-600S Premium FTA Receiver. Now click on the file folder graphic and select the correct bin from your PC file system (there.

Guide by user:Frankott. PLEASE DO NOT PM ME WITH QUESTIONS, POST THEM IN A NEW THREAD. Download the latest file.

Download the LOADER - UpgradeV1.06 HOW TO FLASH. You can flash (load) your receiver with a bin on top of the bin (file) you already have. It will replace it. Use a Null CABLE RS232 on your receiver from the computer.

Or use a Null adaptor from Radio Shack number 26-264B to make a straight through cable a Null cable. Take the cable off going to the LNB to be safe.

If you don't have a 9 pin plug on your computer you may need to use a USB to Serial cable 26-183 at Radio Shack with a Null adaptor. If you need a 9 pin mail to mail gender adapter it is item #: 26-231. You will need to install a drive in your computer for the USB cable.

Un-zip all the files and hook up the cable from your computer to the STB, have the STB off with the switch in the back. Start the loader and click on the FILE folder. Find the bin file you un-zipped that now ends in BIN.

Click on it and it will automatically go in the loader. Select DOWNLOAD S/W then select a COM PORT. NOT on the remote but in front of the receiver hold in the power button as you turn the switch ON in the back. The word BOOT will stay on the STB front panel. Now you can click START on your loader and the% should move up. Don't do anything as the progress bar is going across. Make sure the Computer & STB are done before you go to the next step.

They may not get done at the same time. The receiver needs up to one minute to process the data after the computer is done, (DON'T RUSH THIS). The receiver will count down twice then show '-End'.

When done turn receiver OFF & ON from the back. You may need to do a FACTORY DEFAULT instructions below. 2 legacy lnb hookup. Far cry 2 no cd crack free download. PLUGGING IN CABLE.

BE SURE THE REAR SWITCH IS OFF DURING HOOKUP OR YOU WILL BURN OUT YOUR DISEQC SWITCH.(edit-arbor) Make sure you plug in the cable from the dish to the receiver at the LNB IN. The cables coming from the dish to the switch should be put on the switch at the same number as you have set in your receiver. 'Example', 119 cable goes on number 1 on the diseqc switch and the receiver has #1 for 119 in the program. You can only get one Satellite for each one LNB you have. Two LNB's two Satellites, and so on. You should set your settings. Below is what you may be able to use.

MENU, INSTALLATION, ANTENNA SETTING side arrow to ECHOSTAR 7 (119W). Then do the same to ECHOSTAR 6,8 or 8,10 (110W) ----------------------EchoStar 7 119W.----EchoStar 8,10 110-------Nimiq 1 91W Transponder--12224/V/20000/5/6--12224/V/20000/5/6--10964/V/19850/3/4 Or one that is close. LNB Freq------------11250----------------------11250-------------------------11250 LNB Type------------Standard----------------Standard----------------------Standard Dish Pro change to OCS-DP 22kHz-------------------OFF------------------------Off----------------------------Off Can't use 3 Satellites with this switch. Diseqc Number------LNB1----------------------LNB2--------------------------LNB3 This should match the cables on the switch. Legacy SW-------------OFF-----------------------OFF----------------------------OFF Motorised System---None----------------------None---------------------------None If you don't have a motor. THIS IS WHAT THE SETTINGS ARE. You can start here then change them later.

Captive Works 600S Premium Review The Captive Works Premium will make a definite impact of the FTA market. This unit has all the features that you need. It contains all the extras you enjoy and the biggest surprise is the price. Let us take a look at some of the features. EPG The electronic programming guide is probably one of the most important features of any STB.

The EPG provides the ease of allowing you to scroll and view channels without just flipping blindly. The Captive Works premium has a fully functional guide. A new added feature is the ability to add an icon file for each individual channel. The EPG on this unit is larger than normal.

Although I could not find out how to advance to the next day of programming without scrolling the entire day, the guide has all of the standard features. Audio/Picture Quality The CW-600s premium will shock you.

Hanzipen tc font. The picture quality is unbelievable. Before connecting my premium, I have my SV-1000 connected and on. There is no comparison to the difference in picture quality.

The CW-600s premium really outshines the SV-1000. I connected my digital audio out cable to the unit. The audio quality was excellent. This unit has great sound and audio. My only complaint was losing the ability to control the sound from the CW remote.

I have to use my Home Audio Receiver remote for volume control. With the SV-1000, I was able to use the remote for regular channels and when digital audio was active on a channel, I then used the remote for the Home Audio Receiver. Software/Features Captive Works spared nothing when loading this unit with everything it could. As mentioned earlier you can load an icon file into the CW-600 premium to allow channel icon images. This unit also allows the ability to add you own background image. This feature allows you to personalize your own unit. This unit is fully customizable.